Airstream repair
Worked well, took out roof dents easily. Just takes patience.

Seal the cup over the ding, open the valve, and give the slide hammer a few solid pulls. Little by little the metal walks back to shape — no filler, no respray, no waiting room. It ain't magic: if the paint's intact and the dent has no sharp crease, it's a candidate. That covers most door dings, shopping-cart hits and shallow hail damage.
Hot-glue kits leave residue and can lift clear coat when you twist the tabs off. Stud welders literally put holes in your panel. Clenvox grips with vacuum only — clean the panel, seal the cup, pull the dent, keep the finish your car left the factory with.
Snap the 1/4" quick-connect onto your garage compressor hose, flip the red lever, and the solid brass valve builds serious vacuum grip in seconds. No batteries, no glue gun heating up, no drilling into your panel — the same pneumatic principle body shops use, sized for your garage.
Built to handle a wide range of dents — including door dings, shopping-cart hits, parking bumps, broad panel dents, and shallow hail damage. Its pneumatic suction and controlled pulling force adapt to different dent sizes and panel areas, giving you a versatile tool for everyday auto-body repairs.
Yes — Clenvox runs on the compressor in your garage. It connects with a standard 1/4" quick-connect fitting, and even a small pancake compressor has plenty of air for it. No compressor, no pull — that's the trade for real vacuum grip with no glue.
No glue, no drilling, no heat. The cup grips with pneumatic vacuum only, so your factory finish stays put. Clean the panel first so the rubber seals well, and release the valve before lifting the cup off.
Steel and aluminum body panels: doors, fenders, hoods, quarter panels, tailgates and roofs. It is not for plastic bumpers, trim, or glass — plastic flexes instead of holding a vacuum pull.
If you can hook up an air hose, you can use it. Connect, seal the cup over the dent, open the valve, and work the slide hammer with steady pulls. Most first-timers see their dent moving inside 60 seconds. Go slow and work from the shallow edge of the dent inward.
Yes! You may return the product within 30 days, Please go to the Contact page to follow instructions.
We offer free standard shipping on all U.S. orders. Orders are batched and processed once per week. After your order has been processed and handed to the carrier, packages typically leave our supplier within 1–2 business days and are delivered within 5–7 business days. All delivery times are estimates only and may vary based on your location, carrier volume, and seasonal demand.
Customers call this dent puller easy to use and effective on door dings, shallow hail damage and larger panel dents. Most note it needs a compressor with steady pressure to hit full grip. Many say one pull paid for the tool.
Worked well, took out roof dents easily. Just takes patience.
Works as it should. Wish I bought it sooner. Works for motorcycle tanks. Works on cars.
Pulled two large dents at 100 psi. Works great and has a lot of holding power.
One neat tool. Couldn't believe the quality for the price. The dent is removed from the roof of my daughers Malibu!
Used to pull larger dents out of rear quarter panel and tailgate on truck. Worked perfectly
On the second pull the whole dent popped out and saved me a grand. Percfect!
Worth every cent. I used it to pull out three dents and it did a great job. One of the dents was pretty bad, so on second glance you can see where the dent was.
Works great! Well worth the money, I pulled out a large wrinkle from the side of my pickup with it.
It worked great, you can't even tell I had a dent there.
Worked well on the dent in my truck door
My 63 Grand Prix had a huge dent on passenger door. Was planning on replacement. Bought this on a whim and gave this a shot. BAM! This pulled the dent in three pulls. Now minor bodywork and I keep original door. It stuck well to a not so smooth surface as well.
I'm not a body man, just a diy-er. This puller pulled the dents out incredibly well. I was surprised at how well it worked. Once it's hooked up, the suction allows you to really yank on the slide to pull dents.
Worked great for the project I was working on
Pulled major dents from old pickup very easy.
Had this setup and working on a dent within 5 minutes. Suction is powerful enough that I had a hard time breaking it free on accident.
Worked well on the hood dent I bought it for.
The tool has plenty of suction for removing big dents , make sure you keep the tool and dented surface clean and it will work great !
This tool makes my job easier now. Easy to use and powerful to pull almost any dent.
I love this Air Dent Puller! It is sold at a great price!
This tool took care of business. Don't need to say anything else, beside it does what it is supposed to do.
I just got this tool and was skeptical if it would work or not. I was pleasantly surprised at the results. I highly recommend this tool.
The puller worked and popped out the dent in my hood and fender from a fallen branch.
It pulled out every dent that I could find on my truck.
Good enough for amateur dent repair. Works great with the right kind of dent
Cant believe how nice this tool is. Feels like it will last for ever
Worked extremely well, pulled the dent out in seconds!
You can not imagine how dents I pulled out for people. It paid for itself on the first dent I pulled out with it.
Great tool for pulling out dents on vehicles. The suction is amazing. I have used other suction cup dent pullers in the past and this one by far surpasses them all. Worth the money.
Works great it is made super tough and very durable
This was so easy just take out of the box and start using it. Works great!
Works well. Seems quite solid. Suction really holds.
Fantastic product. Saves hundred dollars from body shop part you could even use this to do side jobs. I highly recommend it.
Great price, did just what I needed, much cheaper than going to a body shop.
It has great suction, and it's slide hammer seem to be well built! I was surprised how well it worked! I'm no auto body mechanic, but it worked better than expected for me!
I've had it for a week and it works great, removed both my dents. Would definitely recommend.
This is a great dent puller and does exactly what they say ot will do. I was very impressed and reccomend it.
smaller cup works better then large one but works great
Just what I needed to take a dent out without painting. Awesome!!
It's a great tool for dents. It has a great grip and is very solid. love it.
Just used for first time and boy did it work good. Paid for self in 30 seconds
Works well, have tried it on several cars and pickups. Be persistent and you will see a difference.
This tool works very well. Plenty of power to put out big dents.
Honestly I saw a YouTube video of this tool, went down to my local store picked it up, & it really worked flawlessly with a little bit a effort of course! I definitely recommend this product!
Simple to use and worked exactly as it was supposed to
I was really surprised how well this puller worked. Suction worked great to allows for dents to be removed. Definitely glad I took a chance with this tool.
Works really well for medium to small dents. Simple to use and effective.
I think I'm really gonna like product so far better than I expected
This pneumatic dent puller works pretty well. Build quality is nice. The suction is awesome.
Easy to use. Works great. Like the different size cups. Highly recommend.
Very easy to use .Worked great. I would recommend this tool !
Works great use for used car lot saves time and money!
I have used this multiple times and it works flawlessly!
I was surprised at just how well this tool worked on dents, even larger dents.
I have had this for about a year now. It has worked flawlessly every time. Holds very well!
Couldn't be happier with the performance and quality of this pneumatic dent puller
Super easy to setup and use. I was surprised that it came with an air line fitting already installed and it happened to be a match to my current setup.
If you do paintless autobody repair it a good product to have
Super easy to use! I was afraid that I would have a hard time since I never did any diy body work before but I was surprised at how simple and straightforward it was!
This dent puller worked as advertised. I've had it over a year and used it several times for shallow depth dents.
This product works well. Could not believe how well this dent puller work
Works well for pulling out the right kind of dents. Good addition to my paintless dent repair options.
Any parent with teens, needs this in their garage. Works fantastic.
It worked for the dents I wanted to pull
Works very well in large dents.
I was impressed how well this tool worked, A+++++
Works better than expected. Would recommend
Plenty suction power~~ Works great
This tool grabbed on tight and worked well.
It is good tool and good price. Works good
Works great
Good quality, great value, works great
Price and quality
Easy to use and effective
This is a great, very effective tool.
Works as intended
Well built
Had it 4 a couple of days works great
Works great on 140psi
This has the power to pull any dent
GREAT SERVICE THANK YOU
They were just as described. Worked great.
It's simple to use and it has good suction
Super productive, Save so much money owning this. I tried many similar ones but this is the best
It works as intended.
Very good quality
Great suction easy to use
Worked great. Better than I expected.
it works better than i expect
This pulled several large/medium dents out quickly. Amazing! I was ready to purchase a dent kit from another store that had a mix of good and bad reviews, but it was much more expensive. I'm glad I found this before I made that purchase. Don't hesitate to buy if you have any dents that need to be pulled out.
Pulls dents better than most pullers I have used.
Great for what I needed
I tried it. I like it! Simple to use. I have a dent in my truck from years back. I saw this tool and took it home. Took maybe five minutes to pull the dent out. Great tool! Just wish I had more dents.
Worked as advertised and saved me a paint job.
Has a lot of strength went it grab any dent
Good product great price
Works well on thin metal
It works !!
Did what I needed it to do.
The best quality
Very nice and easy to use
Easy to use.
This product works great for the price.
It did exactly what I brought it for.
WORKS WELL, WOULD RECOMMEND THIS PRODUCT
Awesome product easy to use and works great
Great design, and effective
Worked better than expected. Great quality.
It strong for pulling dents
Well-constructed, very good quality, great price.
Works great pulling blooper dents.
Buy again
Nice, easy, dent puller. Helps to pull out minor dents. Did a good job for me.
Pays for itself after the first use works very well!
Works well on small dents. I would recommend using it right when you notice the dent.
It does what it is supposed to do and does it without a lot of fiddling and fussing
worth the money for sureproduct worked great for a diy person. would recommend it
I am not an experienced body and fender repairman. But I like how easy it is to use.
Worked great, watched a video on the proper use and had good success
Worked like a champ!
Had it a few weeks. Would recommend.
Good item at good price
Strong suction, good action
Got it with a deal. Well worth the money.
2 weeks, it is very good.
It worked great. Worked as expected.
Has strong vacuum and works as intended. Make sure you’re using an air compressor that can produce 90 PSI continuously and it’ll work just fine.
The functionality of this item is exactly what I needed.
This thing worked great! It helped easily pull out a large dent in my passenger door.
Works fine for newer vehicles but doesn't work on older - 80's and older due to heavier body steel.
Works like a champ, I was actually shocked at how well it sticks!
This is the product you need if you need to fix your car, the suction is amazing. Good product
Very easy to use I saw this used on a Motor Trend car program and checked Amazon and they carried it. I was able to remove several dents very easy.
Very good tool with good suction power. Be aware that the tool requires a lot of compressed air!
Quality was really good. More value for it that comes in box so ease of use.
Very well built for the price, did the job I needed to get done. Like that there was a varity of suction cups.
Slide hammer broke 2nd time using it. Other than that it worked good
As described
Value for money
Great for pulling shallow dents in sheet metal.
This thing is extremely strong works great
This product is so well built, high-quality easy to use as described and shown! I am somewhat known on the tools in my shop as Tim Taylor, I love this tool’s Quality. absolutely no regrets I just love it
It's works perfect it's just taking out most of the dent if it has a crease in then you need to get a very small dent remover the next size up but definitely works great suction it's all in air compressor and air because it does need 100 to 115 ponds to work properly it' takes time you just keep pounding and pounding away it will move towards the dent on its own great tool it's a keeper
Ease of use and it works!
did the trick remember soap water is your friend
Does a good job
I pulled a "mushroom" either by using it with too much pressure or by using it in the same spot too many times. I learned by experience not to do that again. It works. I don't know how long it will last but it works well right out of the box.
Very good product I have pulled out 4 major dents so far turning a 5000$ job in to a 500$ job. Time to take it back to the auto body to have them repair the very small dent ahahahaha btw u will need a air compressor to run this but heck in the long run u save money and now have a air compressors and can pull dents out of your car after your gf smashes it a couple times :) win win
Good.
Good 👍
runs well
Hey gang this works with a compressor. Plug the compressor in and open the valve and there will be suction. Oh and clean the area off first. Simple physics. Great tool. The guy with the one star review and the video of him trying to get the dent out of the Mercedes. Sorry bro your car is a literal tank... And that dent is in the most precarious spot. It worked right away on my Silverado hood dent. I would try and wrap more weight around the pole and swing. Worst case scenario I would remake this took with a longer pole and bigger weight. It's possible. But don't fault the tool for not being able to get every dent ever.
Won’t fix everything but pulled 2 sizeable dents out to at least look presentable.
This product surprised me it pulled out almost all off my rear quarter panel. The large to medium cups work the best
Ya this slide hammer has suction and it does stick to the panel. I haven't worked with it too much but I tried it out briefly.
Works as advertised good value
It works ok
so far works good
good
Don't want to give the wrong idea with only 3 stars as I do think this is a good tool but I couldn't get my dent to pull despite repeated tries with all the different plungers. However, my dent was in a spot they indicate is a difficult pull so will try increasing the psi on my compressor to see if I can get a better hold and then revisit my rating. The quality of the tool is good with the only suspect area being the on/off valve switch which is a bit flimsy. For $100 it's worth having in the shop and sure I can put it to good use.